Special Offer - Speedy Grease Gun, G Coupler, and x12 GL EP Grease Cartridges

Special Offer:

Includes the Speedy Grease Gun, M10 G Coupler and x12 Lithium Grease GL EP Cartridges (Grease cartridges come with sealing caps already installed)

Speedy Grease Gun

The Speedy Grease Gun is a new grease gun which has revolutionized grease application.

• Delivery pressure up to 800 BAR
• Delivering a quantity of 2,5cc each pump (twice the traditional grease guns)
• Weight Kg 1,6
• Cartridge content 400cc/600cc (British standard cartridges) 
• Magnet power > Kg. 60

M10 G Coupler

The G Coupler has a unique sliding sleeve, activated by a thumb lever. The sleeve either locks the four spring-steel jaws onto the Zerk fitting or releases the jaws from the Zerk. When the jaws are locked onto the Zerk a leak-proof seal is created.

No hands are needed to align or hold the coupler in place while greasing. The locked connection is positive and rigid preventing the coupler from coming loose and breaking the leak-proof seal. If a fitting becomes pressurized, especially a recessed one, just depress the thumb lever and release the coupler.

Stuck-on couplers are a thing of the past. Because it does not leak, the grease goes in, not on the machine and the bearings get the grease they so desperately need.

Lithium Grease GL EP Cartridges x 12

Contains box of 12 cartridges. 

A premium quality Lithium-thickened NLGI No2 lubricating grease. Formulated with extreme additives and mineral base oil. Used extensively throughout industry and the automotive sector. For use in all anti-friction and plain bearings applications. Subjected to high load conditions. Contains extreme pressure and oxidation resistant additives designed to reduce wear and improve grease performance and extend component life. 

Remove the ring pull and the collar holding the follower and insert cartridges into a standard 400g grease gun. When using this grease for the first time check the equipment manufacturer's recommendations and the compatibility with any greasing points or bearings prior to application. As a general rule take care not to over apply. If necessary seek advice from your grease supplier.

Technical Data Sheet